• src/sbbs3/sbbsecho.h sbbsecho.c rechocfg.c echocfg.c

    From rswindell@1:103/705 to CVS commit on Sat Mar 31 02:38:50 2018
    src/sbbs3 sbbsecho.h 3.21 3.22 sbbsecho.c 3.72 3.73 rechocfg.c 3.29 3.30 echocfg.c 3.29 3.30
    Update of /cvsroot/sbbs/src/sbbs3
    In directory cvs:/tmp/cvs-serv13916

    Modified Files:
    sbbsecho.h sbbsecho.c rechocfg.c echocfg.c
    Log Message:
    SBBSecho/EchoCfg v3.04 - uses the newly merged sbbsecho/binkit/ftn_domains.ini If you're not using BinkIT (you're using some other FidoNet mailer), you can safely ignore all the settings/options.
    A lot of the online help for the new settings/menus needs to be written
    still and the wiki now needs a lot of update to reflect the changes.
    The "title" of this program was changed, again, from "SBBSecho Config" to "[Synchronet] FidoNet Config" since it configures more than just SBBSecho
    now.


    --- SBBSecho 3.04-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Vk3jed@1:103/705 to rswindell on Sat Mar 31 22:16:00 2018
    rswindell wrote to CVS commit <=-

    @VIA: VERT
    src/sbbs3 sbbsecho.h 3.21 3.22 sbbsecho.c 3.72 3.73 rechocfg.c 3.29
    3.30 echocfg.c 3.29 3.30 Update of /cvsroot/sbbs/src/sbbs3
    In directory cvs:/tmp/cvs-serv13916

    Modified Files:
    sbbsecho.h sbbsecho.c rechocfg.c echocfg.c
    Log Message:
    SBBSecho/EchoCfg v3.04 - uses the newly merged sbbsecho/binkit/ftn_domains.ini If you're not using BinkIT (you're
    using some other FidoNet mailer), you can safely ignore all the settings/options. A lot of the online help for the new settings/menus needs to be written still and the wiki now needs a lot of update to reflect the changes. The "title" of this program was changed, again,
    from "SBBSecho Config" to "[Synchronet] FidoNet Config" since it configures more than just SBBSecho now.

    What happens for those of us using ftn_domains.ini, but not BinkIT (I am running a fully 5D system with binkd)?


    ... "640K ought to be enough for anybody." Bill Gates '81
    --- MultiMail/Win32 v0.49
    ■ Synchronet ■ Freeway BBS, Bendigo Australia. freeway.apana.org.au
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Digital Man@1:103/705 to Vk3jed on Sat Mar 31 12:35:37 2018
    Re: Re: src/sbbs3/sbbsecho.h sbbsecho.c rechocfg.c echocfg.c
    By: Vk3jed to rswindell on Sat Mar 31 2018 10:16 pm

    rswindell wrote to CVS commit <=-

    @VIA: VERT
    src/sbbs3 sbbsecho.h 3.21 3.22 sbbsecho.c 3.72 3.73 rechocfg.c 3.29 3.30 echocfg.c 3.29 3.30 Update of /cvsroot/sbbs/src/sbbs3
    In directory cvs:/tmp/cvs-serv13916

    Modified Files:
    sbbsecho.h sbbsecho.c rechocfg.c echocfg.c
    Log Message:
    SBBSecho/EchoCfg v3.04 - uses the newly merged sbbsecho/binkit/ftn_domains.ini If you're not using BinkIT (you're using some other FidoNet mailer), you can safely ignore all the settings/options. A lot of the online help for the new settings/menus needs to be written still and the wiki now needs a lot of update to reflect the changes. The "title" of this program was changed, again, from "SBBSecho Config" to "[Synchronet] FidoNet Config" since it configures more than just SBBSecho now.

    What happens for those of us using ftn_domains.ini, but not BinkIT (I am running a fully 5D system with binkd)?

    You'll need to do the merge as well. ftn_domains.ini is now deprecated and those configuration value (domains) are now stored in sbbsecho.ini and configurable via echocfg. And BinkIT is a "fully 5D system" as well.

    digital man

    Synchronet/BBS Terminology Definition #14:
    DOCSIS = Data Over Cable Service Interface Specification
    Norco, CA WX: 77.0°F, 42.0% humidity, 9 mph ENE wind, 0.00 inches rain/24hrs --- SBBSecho 3.04-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Vk3jed@1:103/705 to Digital Man on Sun Apr 1 07:37:00 2018
    Digital Man wrote to Vk3jed <=-

    What happens for those of us using ftn_domains.ini, but not BinkIT (I am running a fully 5D system with binkd)?

    You'll need to do the merge as well. ftn_domains.ini is now deprecated
    and those configuration value (domains) are now stored in sbbsecho.ini
    and configurable via echocfg. And BinkIT is a "fully 5D system" as
    well.

    I figured as much on all counts, and rolling ftn_domains.ini into the main FTN configuration makes sense. Just that your documentation referred to BinkIT, without discussing the hybrid scenarios (I'm guessing it will be obvious what I need to use for my setup and what I don't). Anyway, I'm probably due to pull a new version off CVS, though not sure when I'll get to doing it. Some of the recent developments look exciting. :)


    ... Massachusetts has the best politicians money can buy.
    --- MultiMail/Win32 v0.49
    ■ Synchronet ■ Freeway BBS, Bendigo Australia. freeway.apana.org.au
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From rswindell@1:103/705 to CVS commit on Wed Jul 18 21:13:48 2018
    src/sbbs3 sbbsecho.h 3.23 3.24 sbbsecho.c 3.86 3.87 rechocfg.c 3.30 3.31 echocfg.c 3.34 3.35
    Update of /cvsroot/sbbs/src/sbbs3
    In directory cvs:/tmp/cvs-serv16308

    Modified Files:
    sbbsecho.h sbbsecho.c rechocfg.c echocfg.c
    Log Message:
    Added a "MinFreeDiskSpace" setting to the root section of sbbsecho.ini (defaults to 10 megabytes, "10M").
    When SBBSecho starts up, if this minimum amount of free space is not
    available in any of the following directories, SBBSecho will display an
    error and immediately exit:
    - data directory (in SCFG)
    - logs directory (in SCFG)
    - netmail directory (in SCFG)
    - outbound directory (from sbbsecho.ini)
    - temp directory
    - each linked-node's outbox, if configured

    If the sysop runs out of disk space for some reason, at least SBBSecho
    won't contribute to the problem.


    --- SBBSecho 3.05-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From rswindell@1:103/705 to CVS commit on Tue Aug 7 11:59:23 2018
    src/sbbs3 sbbsecho.h 3.24 3.25 sbbsecho.c 3.91 3.92 rechocfg.c 3.31 3.32 echocfg.c 3.35 3.36
    Update of /cvsroot/sbbs/src/sbbs3
    In directory cvs:/tmp/cvs-serv29614

    Modified Files:
    sbbsecho.h sbbsecho.c rechocfg.c echocfg.c
    Log Message:
    Incremented version to 3.06
    Added version for Bill McGarrity: for each linked-node, a preferred
    local address (AKA) can be specified to be used as the source address
    when creating packets destined for that linked-node. If no local address
    is specified, the previous (best match) logic is used: find an AKA that
    has the same zone and net as the destination address, if none found, use
    the first address with the same zone.


    --- SBBSecho 3.05-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From rswindell@1:103/705 to CVS commit on Mon Jul 22 21:55:55 2019
    src/sbbs3 sbbsecho.h 3.32 3.33 sbbsecho.c 3.118 3.119 rechocfg.c 3.38 3.39 echocfg.c 3.45 3.46
    Update of /cvsroot/sbbs/src/sbbs3
    In directory cvs:/tmp/cvs-serv22662

    Modified Files:
    sbbsecho.h sbbsecho.c rechocfg.c echocfg.c
    Log Message:
    New option for SBBSecho to basically ignore any configured outboxes for
    linked nodes: UseOutboxes (default: true)

    BinkIT will continue to outboxes even when this option is set to false, but SBBSecho won't place any mail files in the outboxes when this option is set to true.

    For PSI-Jack who was surprised that SBBSecho put mail files into outboxes. Since it appears BinkD supports both outboxes and normal outbound directories for linked nodes and BinkIT does as well, this shouldn't really make any difference - just a sysop preference.


    --- SBBSecho 3.07-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Digital Man@1:103/705 to rswindell on Mon Jul 22 22:39:30 2019
    Re: src/sbbs3/sbbsecho.h sbbsecho.c rechocfg.c echocfg.c
    By: rswindell to CVS commit on Mon Jul 22 2019 09:55 pm

    BinkIT will continue to outboxes even when this option is set to false, but SBBSecho won't place any mail files in the outboxes when this option is set to true.

    Correction: SBBSecho won't play any mail files in the outboxes when this option
    is set to *false*.

    digital man

    Synchronet "Real Fact" #47:
    The Synchronet Museum is online at http://wiki.synchro.net/history:museum:index Norco, CA WX: 77.3°F, 56.0% humidity, 2 mph SE wind, 0.00 inches rain/24hrs
    --- SBBSecho 3.07-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)